Spindle 3/4" Arbor Hole for Motor Grinder Shaft Right Hand Threaded 1/2" Shaft
$11.25
222
Description
3/4″ ARBOR HOLE – RIGHT HAND SPINDLE
1/2″ STRAIGHT SHAFT
–
3/4″ ARBOR HOLE
–
THREADED SHAFT SIZE 1/2″
–
4″ LONG
–
RIGHT
HAND THREAD
–
Arbor – Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
A 3/4″ Arbor Hole Spindle is used to hold Wheels with 1/2″ arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more.
Arbor hole on this Spindle is a 3/4″ to work on 3/4″ diameter shaft Grinders – Motors.
The arbor is made to be used on the RIGHT Side of the motor, with right hand threading, fastened and held on the motor shaft with 2 Allen Head Set Screws.
Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.
FEATURES:
·
Precision Quality
·
Machining is done by CNC Equipment
·
Made of Steel and Anodized Black Finish
·
Set of Allen Screw do not protrude above the main shaft of the spindle.
·
Spindle comes with 2 Steel Machined Washers
·
Right Hand 1/2″ x 20 Nickel Plated Nut
·
Quality Hardware (Washers and Screws)
Specifications:
JETS Product # 1603-963475
–
Material:
Cold Rolled Steel
–
Overall Length:
4-5/64″ – 103.65mm
–
Arbor Body Diameter:
1-1/8″ – 28.57mm
–
Spindle Body Length:
1-35/64″ – 39.24mm
–
Spindle 1/2″ Shaft Length:
2-17/32″ – 64.2mm
–
Arbor Hole
:
3/4″ – 19.0mm
for Shaft Connection
–
Arbor Shaft Depth:
1-1/4″ – 32.0mm
–
Weight:
8.25z. – 234gr
Spindle is made to be
used on a
3/4″ shaft
diameter and on the
RIGHT Hand Side of Motor
with
forward direction
.
SHIPPING: Via USPS FIRST CLASS MAIL
DOMESTIC US SHIPPING
FREE
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETSINC.
B9 412 CKSP Z M