Spindle 5/8" Arbor Hole Motor 1/2" Shaft for Grinder Motor Hold Polishing Wheel

Description

5/8″ ARBOR – SPINDLE 1/2″ STRAIGHT SHAFT
5/8″ ARBOR HOLE
–
SHAFT SIZE 1/2″
–
–
3-7/16″ LONG –
RIGHT HAND THREAD
–
–
Arbor – Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
This Arbor – Spindle is used to hold Wheels with 1/2″ arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more.
The arbor hole of Spindle measures 5/8″ ID, to work on 5/8″ diameter shaft Grinders, Motors or Polishers.
The arbor is made to be used on the Right Side of the motor, with the rotation towards the operator when facing the motor,  spindle is fastened and held on the motor shaft with 2 Allen Head Set Screws.
Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.
FEATURES:
JETS Product # 1603-953475
·
Precision Quality
·
Machining is done by CNC Equipment
·
Made of Steel and Anodized Black Finish
·
Set of Allen Screw do not protrude above the main shaft of the spindle.
·
Spindle comes with 2 Steel Machined Washers
·
Right Hand 1/2″ x 20 Nut
·
Quality Hardware (Washers and Screws)
Specifications:
–
Material:
Cold Rolled Steel
–
Overall Length:
3-7/16″ – 87.3mm
–
Arbor Body Diameter:
1″ – 25.3mm
–
Spindle Body Length:
1-9/16″ – 39.7mm
–
Spindle Shaft Length:
1-7/8″ – 47.65mm
–
Arbor Hole
:
5/8″ – 0.626″ –  15.94mm exact – for Shaft Connection
–
Spindle Shaft Diameter:
1/2″ – 12.7mm
–
Weight:
7.3oz. – 207gr
Spindle is made to be
used on a
5/8″ shaft
diameter and on the
Right Hand Side of Motor
with
forward direction
.
Item is New
SHIPPING:
Via USPS FIRST CLASS MAIL
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more
J
ewelers
E
quipments
T
ools and
S
upplies.
JETSINC.
B9 412 CKSP  Z M